StackPro trailer range can shift large squares much quicker than anybody else

Share on facebook
Share on twitter
Share on linkedin
Share on whatsapp
Share on email

The Stackpro self-loading square bale collecting and stacking system is fully automated and that allows just one operator to load and haul over 20 bales at a time

Anderson Stackpro square bale self-loading trailers are designed and built to give you faster loading with a high capacity for each load and all the while saving time with this one-person operation of collecting and stacking

Burder Ag Attachments is a major distributor of leading agricultural products and has a knack of seeking out some the world’s best model lines.

This could be partly down to the fact that Burder Ag Attachments themselves are manufacturers and can spot well-built brands better than most.

StackPro hay trailers manufactured by the Anderson Group are a good example of the quality lines that Burder handle.

The Anderson Group’s Stackpro hay trailers are built to cater for large-scale hay operations, as these models can load hay bales much quicker than most and in quantities way above average.

There are two models to choose from in the StackPro trailer range, the Stackpro 5400 is the smallest and at the entry level with a bale handling range of 8 to 18 bales each load., while the Stackpro 7200 can handle 12 to 27 bales, depending on the bale size.

Considering their high-quality build, weighing up to 20% more than standard models at 10.1 and 11.3 tonnes respectively, these trailers can still move quickly, and operators will find it easy to collect and stack square bales at a higher speed than they would expect.

It’s the robust build of the Stackpro that has made these models popular with local hay producers and contractors.

They can simply endure our more extreme conditions, while the fully automated loading system allows one operator to handle a workload of twice as much than if they were working with a less current design.

The StackPro can also keep track of the number of bales in each paddock, ideal for contractors keeping an accurate count. While the fully electronic control panel, weighs bales for a total load, with a weighing system that offers a + -2.5% margin of error.

To complement the positive response to the StackPro tralers, Burder Industries has appointed Joe Mancini as the sales specialist to impart his considerable knowledge about the range.

Joe says the StackPros have a definite advantage due to their unique pickup system design that follows the same bale position as it came out of the baler.

“In addition, the StackPro is fitted with grabber arms that levitates the bale off the ground,” Joe says.

“This is a big advantage over systems that only have chain-driven platforms that run into the bale. Then the chain has to make its way up a sometimes very long platform. That system has a tendency to actually skip the bale on the ground for a while before it picks up,” Joe reiterates.

The StackPro loading process differs to the point that it runs a fully automated loading system. The operator can use the Danfoss touch screen to input information about the bales, and the system will do the rest.

Joe adds, “With the StackPro, the operator only has to guide the trailer to the next bale, while the automated system will do the rest for you.”

Another advantage the StackPro offers is through the Danfoss touchscreen. The operator can easily see the number of bales loaded in each paddock run, and even for each customer account.

Joe also wants to make another valid point, “The StackPros have loading arms able to support bales up to 1100kg in weight without damaging twine and each model has a built-in lubrication-free pivot system that makes it virtually maintenance-free.

Anderson products are distributed exclusively through Burder Ag Attachments, and they will provide all the backing you will ever need, from spare parts and service to technical support.

Right now, there are two Anderson StackPros available at the pre-price increase due in 2022.

In addition, buy now and claim the full amount (for eligible purchases) under the Instant Asset Tax Write-off scheme this financial year.

To secure either one of these models, talk to Joe Mancini now on mobile: 0419 241 317, 03 5722 2343 or email: joe.mancini@burder.com.au

Stackpro 5400 buy now and save

The Stackpro 5400 is the slightly smaller model in the range and is ideal for medium operations where a lower overall lower cost to run is important.

The Stackpro 5400 self-loading trailer can handle square bales up to 120cm x 130cm x 240cm and runs off two double hydraulic outlets.

Transport capacity of the 5400 depends on bale size but as a general guide is from 8 to 18 bales each load, while tractor pto power of 110kW (150hp) is recommended.

Grab this model now at the prior to increase price, for immediate delivery at $195,900 + GST

Stackpro 5400 Specifications

Bale
Round bale diametern/a
Square baleUp to 51 in x 48 in (130 cm x 120 cm)
Bale typeBaleage/dry hay/straw
Specifications
Tandem axleStandard
Tandem axle with brakesOptional
Self-Steering axle with brakesOptional
Safety chainStandard
Self-loading arm designHydraulic clamp
Able to load a second row of balesPlatform
Tires550/45-22,5
Tractor minimum hydraulic flow172 bar (2500 psi)
power requirements110kW/150hp
Tractor outlets required3 (4 if equipped with self-steering axle)
PTO Speed/ PTO shaft1000 RPM/1 3/4-Z20
ControlsTouchscreen
Dimensions
Width – A2.55 m (8 ft 4 in)
Overall width (including loading arm)2.55 m (8 ft 4 in)
Height – B3.86 m (12 ft 8 in)
Overall height (including loading arm)3.86 m (12 ft 8 in)
Bed height – E1.85 m (6 ft 1 in)
Overall length – D10.85 m (35 ft 7 in)
Overall weight10,160 kg (22,400 lb)
Empty Weight on tow bar***1655 kg (3650 lb)
Capacity
Round bale 1.2 m x 1.2 m (4 ft x 4 ft diameter)n/a
Round bale 1.2 m x 1.5 m (4 ft x 5 ft diameter)n/a
Round bale 1.2 m x 1.8 m (4 ft x 6 ft diameter)n/a
Round bale 1.5 m x 1.5 m (5 ft x 5 ft diameter)n/a
Round bale 1.5 m x 1.8 m (5 ft x 6 ft diameter)n/a
Square bale 90 cm x 90 cm x 2.4 m (3 ft x 3 ft x 8 ft long)18 bales
Square bale 1.2 m x 90 cm x 2.4 m (4 ft x 3 ft x 8 ft long)12 bales
Square bale 1.2 m x 1.2 m x 2.4 m (4 ft x 4 ft x 8 ft long)8  bales
Loading arm lifting capacity1089 kg (2400 lb)
Total weight including load19 000 kg (42 000 lb)

Stackpro 7200 buy now and save

For operations where everything needs to be moved fast and efficient, this is where the Stockpro 7200 comes in.

With their high speed and smooth transmission, and extra dimension of productivity is achieved by these trailers as they save time and also operator hours.

The Stackpro 5400 self-loading trailer can handle square bales up to 120cm x 130cm x 240cm and runs off two double hydraulic outlets.

Transport capacity of the 7200 jumps up to an eyewatering 12 to 27 bales each load, while tractor pto power of 129kW (175hp) is recommended.

For the added capacity the Stackpro 7200 provides, it is great value at prior to increase price, and for immediate delivery at $223,900 + GST.

Stackpro 7200 Specifications

Round bale diametern/a
Square baleUp to 51 in x 48 in (130 cm x 120 cm)
Bale typeBaleage/dry hay/straw
Specifications
Tandem axleStandard
Tandem axle with brakesOptional
Self-Steering axle with brakesOptional
Safety chainStandard
Self-loading arm designHydraulic clamp
Able to load a second row of balesPlatform
Tyres550/45-22,5
Tractor minimum hydraulic flow172 bar (2500 psi)
power requirements129kW/175hp
Tractor outlets required3 (4 if equipped with self-steering axle)
PTO Speed/ PTO shaft1000 RPM/1 3/4-Z20
ControlsTouchscreen
Dimensions
Width – A2.55 m (8 ft 4 in)
Overall width (including loading arm)2.55 m (8 ft 4 in)
Height – B3.86 m (12 ft 8 in)
Overall height (including loading arm)3.86 m (12 ft 8 in)
Bed height – E1.83 m (6 ft)
Overall length – D11.91 m (39 ft)
Overall weight11,350 kg (25,022 lb)
Empty Weight on tow bar***1261 kg (2782 lb)
Capacity
Square bale 90 cm x 90 cm x 2.4 m (3 ft x 3 ft x 8 ft long)27 bales
Square bale 1.2 m x 90 cm x 2.4 m (4 ft x 3 ft x 8 ft long)16 bales
Square bale 1.2 m x 1.2 m x 2.4 m (4 ft x 4 ft x 8 ft long)12 bales
Loading arm lifting capacity1089 kg (2400 lb)
Total weight including load20,000 kg (44,000 lb)